BLWTT - CANON CT-SX TONER
- MSDS: BLWTT
- Manufacturer: NASHUA CORP
- Product Name: CANON CT-SX TONER
- National Stock Number: 6850-00N021949
Product Identification
Product ID:CANON CT-SX TONER
MSDS Date:07/25/1990
FSC:6850
NIIN:00N021949
MSDS Number: BLWTT
Responsible Party
NASHUA, NH 03061
US
Emergency Phone: 603-880-5555
Info Phone: 800-258-1370
Preparer: R L SEVIGNY
Cage: 82784
Contractor
Telephone: 603-880-2323
Cage: 82784
Ingredients
STYRENE ACRYLATE POLYMER
CAS: 25153-46-2
Fraction By Weight: 55-60%
MAGNETITE
CAS: 1309-38-2
RTECS: OM4800000
Fraction By Weight: 35-40%
BLACK PIGMENT
CAS: 88377-66-6
Fraction By Weight: 1-5%
PROPENE POLYMERS(POLYOLEFIN)
CAS: 9003-07-4
RTECS: UD1842000
Fraction By Weight: 1-5%
POLYETHYLENE; (POLYOLEFIN)
CAS: 9002-88-4
RTECS: TQ3325000
Fraction By Weight: 1-5%
DIATOMACEOUS EARTH, NATURAL; (AMORPHOUS SILICA) (MFR CAS #
CAS: 61790-53-2
RTECS: HL8600000
Fraction By Weight: < 1.0%
OSHA PEL 20 MPPCF
ACGIH TLV: 10 MG/M3 TDUST; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO KNOWN HEALTH HAZARD WHEN USED AS
INTENDED IN A COPY MACHINE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:IRRITATION OF EYES AND RESPIRATORY TRACT MAY
OCCUR IN HEAVY DUST CONDITIONS.
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:INHAL: REMOVE FROM EXPOSURE. SKIN: WASH SKIN WITH SOAP AND
WATER. EYES: FLUSH EYES WITH WATER FOR AT LEAST 15 MIN. INGEST:
DRINK WATER IF INGESTED.
Fire Fighting
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CO2.
Fire Fighting Procedures:AVOID INHALATION OF SMOKE. WEAR MSHA/NIOSH
SCBA. COOL FIRE EXPOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:MATERIAL CAN FORM EXPLOSIVE MIXTURES WHEN
SUSPENDED IN AIR. ALL IGNITION SOURCES SHOULD BE AVOIDED.
Accidental Release
Spill Release Procedures:VACUUM OR SWEEP UP AS WITH ANY NON-TOXIC
POWDER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE NEXT TO STRONG OXIDIZERS.
EYE PROTECTION AND RESPIRATOR MAY BE REQUIRED FOR BULK HANDLING.
Other Precautions:AVOID EXCESSIVE EXPOSUE TO HEAT.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHEN PRODUCT IS USED AS INTENDED.
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:LOCAL EXHAUST/MECHANCIAL (GENERAL): NORMAL OFFICE
CONDITION.
Protective Gloves:NONE REQUIRED WHEN USED AS INTENDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED WHEN USED AS INTENDED.
Work Hygienic Practices:AVOID BREATHING DUST IF SAMPLE IS SPILLED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:160F,71C
Spec Gravity:1
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK POWDER, FAINT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE WITH COMMON MATERIALS WITH WHICH THE PRODUCT MAY REASONABLY COME
INTO CONTACT.
Stability Condition to Avoid:AVOID OPEN FLAME
Hazardous Decomposition Products:TOXIC DECOMPOSITION PRODUCTS FORMED ON
COMBUSTION.
Disposal
Waste Disposal Methods:DISPOSE ACCORDING TO FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.